Follow these steps if your furnace fails to start.
1. CHECK YOUR THERMOSTAT
Is it set below the present house temperature in the house? If so, raise the setting above present house temperature.
2. CHECK THE FURNACE POWER SWITCH
Is it in “on” position.
3. CHECK YOUR ELECTICAL PANEL
Look for a blown fuse, or a tripped breaker. If a fuse is blown, replace with fuse with correct amperage. If a breaker is tripped then reset the breaker.
4. CHECK THE RESET BUTTON ON THE RELAY BOX
Press it only ONCE... (maybe located on the furnace or on the chimney pipe or on the oil burner.)
5. CHECK OIL BURNER MOTOR
If you hear a “hum” and burner has not started, press the overload button on the motor.
6. CHECK THE OIL TANK GAUGE
To ensure your tank is not empty.
If trouble still persists please call: 1-800-265-3069
FOR SERVICE TO YOUR HEATING SYSTEM PLEASE CALL 519-357-2664
CARE OF YOUR HEATING EQUIPMENT
Oil burner motor, fan motor (if forced warm air) circulating pump motor (if hot water) three times during the season with not more than three drops of #20 motor oil.
CAUTION: DO NOT USE sewing machine oil.
Remember to clean or replace the air filters once each month.